TransEdit is a transponder list editor, scanner and analyzer for DVB-S, DVB-T, DVB-C, ISDB and ATSC. As an add-on for DVBViewer Pro/GE it provides extended channel search capabilities. TransEdit supports TechniSat cards (SkyStar2/S2, AirStar2, CableStar2) with WDM driver and DVB devices with BDA driver (Broadcast Driver Architecture).
» Author: yadas dtd. 07.04.2013
» Size 0.67 MB; Needed time to download 87.3 Sec. with ISDN
» Total Hits: 1275
» Not rated yet
Added: Button to add new global satellite profile (for more easy use .. the old method confuses a lot of users).
Added: Support for Enable/Disable scan-ranges without loss the range setting.
Improved: Auto-Save now saves profiles changes on the fly when change to another profile, start blindscan, or software ends.
Fixed: DPI issue on Options form.
Update: Streamreader to latest version.
Some bugs are fixed.
» Author: Ricky dtd. 27.10.2011
» Size 0.63 MB; Needed time to download 82.67 Sec. with ISDN
» Total Hits: 3052
» Rating: 2.88 at 40 Votes
Improved: Reports and Transponders INI’s is now saved by default on ..reports & ..transponders on EBS folder.
Improved: Decimalseparator on [Satellite Report] is now based on system configuration.
Improved: [Satellite report] Added option in popup menu to show only reports from selected satellite.
Improved: Player Integration; Now added option to set variables in kHz.
Fixed: EBS now works with VLC 1.1.x (Tested on VLC 1.1.11).
Fixed: Clean install makes a exception on first EBS start.
Fixed: Some bugs are fixed in Multi-sat scan feature.
Fixed: Loop mode for each selected satellite in Multi-sat function is made disabled when do a multi-sat scan.
Some minor bugs fixed and some improvements.
» Author: Ricky dtd. 18.08.2011
» Size 0.58 MB; Needed time to download 76.55 Sec. with ISDN
» Total Hits: 1140
» Rating: 2 at 5 Votes
Added: Player Integration* (Tested with VLC) for [Satellite Report]
Added: Copy pattern; Tabulation.
Added: DoubleClick in the [GeneralReport] textbox clear screen.
Added: Added a DirectTV/DSS item to device config.
Added: Support for “Contionous 22Khz tone control for SingleBand LNB” in EBS.
Added: Now checks Exit Code of BLScan console.
Improved: Now detects if TPDir and ReportDir directory exists. If not, saved it on EBS profile dir.
Improved: Now detects if scan-ranges are defined before save profile.
Fixed: Some issues with report list.
Fixed: Some issues en Multi-Sat scanner list.
Fixed: Msgbox appears when copy item.
Fixed: Device menu is now disabled when BLScan is working.
Some minor bugs are fixed.
Update: StreamReader and BLScan to latest version.
» Author: Ricky dtd. 10.08.2011
» Size 0.58 MB; Needed time to download 76.29 Sec. with ISDN
» Total Hits: 803
» Not rated yet
What's new? 0.0.5-1
-Some fixes
-Changes on dvbapi
+Now can send messages through webinterface between SBox clients <-> servers using cccam protocol
+Full emm support on cccam server
» Author: Ricky dtd. 01.08.2011
» Size 0.73 MB; Needed time to download 95.44 Sec. with ISDN
» Total Hits: 682
» Rating: 1 at 10 Votes
Das Schweizer Messer für Enigma1 & Enigma2 Sat- und Kabel Boxen.
Mit iDreamX lassen sich die Favoriten-Listen (Bouquets) bearbeiten, im EPG (elektronische Fernsehzeitung) schmökern und suchen, Aufnahme Timer setzen und bearbeiten, TV- und Radio Programme auf den Mac, iPhone, iPad, Android, Symbian streamen und vieles mehr.
The Swiss Knife for Enigma1 & Enigma2 Sat- & Cable Boxes.
With iDreamX you can edit your favorite lists (bouquets), read and search the EPG (Elektronic Program Guide), set and edit timer events, watch tv or hear radio on your Mac, iPhone, iPad, Android, Symbian and much more.
iDreamX is a Mac OSX application and works with: all Dreamboxes (except DB100), VU+ (solo & duo), Kathrein with Enigma2, Topfield with Enigma2 and more....
» Author: Ricky dtd. 28.07.2011
» Size 16.5 MB; Needed time to download 36,2124 Min with ISDN
» Total Hits: 804
» Rating: 1 at 10 Votes
Windows 7 internet explorer simgesi 1 Eylül 2010 23:51
ECODER
arkadaşlar windows 7 de internet explorer simgesini masaüstüne getiren bir program yazdım
deneyip sonucları yazarsanız sevinirim(kısayol deyil)
denene windows türü ve sisteminide(32 bit 64 bit) bildirirseniz iyi olur.
test sonuclarınızı bekliyorum. tşk.
» Author: ekremkocak dtd. 02.09.2010
» Size 216.06 kB; Needed time to download 27.66 Sec. with ISDN
» Total Hits: 1066
» Rating: 2 at 5 Votes
- Fixed a hangup when replaying a TS recording with subtitles activated (reported
by Timo Helkio).
- Fixed handling the 'new' indicator in the recordings menu for TS recordings
(thanks to Derek Kelly).
- Added cap_sys_nice to the capabilities that are not dropped (thanks to Rolf
Ahrenberg).
- Updated the Italian OSD texts (thanks to Diego Pierotto).
- Added cRecordingInfo::GetEvent() (thanks to Marcel Unbehaun).
- Improved synchronizing the progress display, trick modes and subtitle display
to the actual audio/video. This now works independent of any buffer sizes the
output device might use.
+ The cBackTrace class has been replaced with cPtsIndex, which keeps track
of the PTS timestamps of recently played frames.
+ cDevice::GetSTC() is now required to deliver the STC even in trick modes.
It is sufficient if it returns the PTS of the most recently presented
audio/video frame.
+ The full-featured DVB cards need an improved firmware in order to return
proper STC values in trick modes (thanks to Oliver Endriss for enhancing the
av7110 firmware).
- Adapted cFrameDetector::Analyze() to HD NTSC broadcasts that split frames over
several payload units (thanks to Derek Kelly for reporting this and helping in
testing).
- Modified cFrameDetector::Analyze() to make it process whole frames at once, so
that file I/O overhead is minimized during recording (reported by Günter
Niedermeier).
- Added command line help for the '-i' option.
- Fixed cDvbPlayer::NextFile() to handle files larger than 2GB (thanks to Jose
Alberto Reguero).
- Improved replay at the begin and end of a recording. The very first and very last
frame is now sent to the output device repeatedly until GetSTC() reports that it
has been played. cDvbPlayer::Action() no longer calls DeviceFlush() (thanks to
Reinhard Nissl for making sure vdr-xine no longer needs this).
- Added missing '[]' to the delete operator in cMenuEditStrItem::~cMenuEditStrItem().
- Added missing virtual destructor to cPalette.
- Now freeing configDirectory before setting it to a new value in
cPlugin::SetConfigDirectory().
- Fixed a crash when jumping to an editing mark in an audio recording.
- Fixed the 'VideoOnly' condition in the PlayPes() and PlayTs() calls in
cDvbPlayer::Action() (thanks to Reinhard Nissl).
- cDevice::PlayTs() now plays as many TS packets as possible in one call.
- Making sure any floating point numbers written use a decimal point (thanks to
Oliver Endriss for pointing out a problem with the F record in the info file of
a recording).
- Fixed detecting the frame rate for radio recordings.
- Added missing AUDIO_PAUSE/AUDIO_CONTINUE calls to cDvbDevice (thanks to Oliver
Endriss).
- No longer writing the video type into channels.conf if VPID is 0 (thanks to
Oliver Endriss for reporting this).
- Improved efficiency of cEIT::cEIT() (thanks to Tobias Bratfisch).
» Author: tonytr dtd. 14.04.2009
» Size 0.57 MB; Needed time to download 74.75 Sec. with ISDN
» Total Hits: 1216
» Rating: 3.5 at 10 Votes
Change Log for this Pre-Alpha :
Reduced tendency to sleep for a few seconds when closing audio.
This was very annoying, but it is now significantly reduced. However, there is still an issue with fast play sound getting too far ahead.
DISABLED 2 OPTIONS :- DEEP PARSING, PARSE ALL PACKETS.
There are bugs, and it makes my brain hurt, so these are now OFF.
Auto-Split output by Clip.
Saves each clip into a separate file in a single action.This is the RECOMMENDED approach, for compatibility with other players.
File - Save PARTS - Split - @clip.
Option to automatically added Clip number to Output File Name.
When manually saving each clip as you go along, it will automatically add the clip number to the name of the output file.
Menu - Output - Default Extension - Add Clip Number.
Auto-Preview on BMP snapshot.
To avoid being surprised by the effect of the difference in Luminance settings between Overlay and RGB modes, a preview of how the frame looks in RGB mode will be shown, together with the luminance controls to allow adjustment.
Closing the Luminance controls commits the BMP .
By default, this Auto-Preview action only occurs on the first snap from the file, but this can be changed in the Menu - Output - BMP - Auto-Preview.
Expert users can modify the effect of the Luminance preset buttons. INI file :- "LumPresets=gamma1,contrast1,brightness1;gamma2,contrast2,brightness2;".
CUE mode throttle.
The CUE button seemed way too fast on a Pentium 4, so now it will default to being around the same speed as a P3 CUE.
If you prefer the faster CUE on a P4, then turn OFF :-
MENU - PREVIEW - TIMING METHOD - NOT SO FAST.
Crop Top and Bot Edges.
Some videos have annoying dots on the top or bottom edge, can now be hidden from view.
Menu - View - Cropping- Crop Top and Bot Edges.
Option to invert view (Vertical Flip).
Menu - View - Special FX - Invert. [Shift-I]
Playback volume handling changes.
Volume limiting option for quieter preview of loud files. Reduces the playback ceiling to roughly 70% of maximum. Volume boost and ceiling values can be overridden in the INI file. Auto reset of Audio track number if selected track not found.
Hysteresis on Automatic Volume Control.
New action - Split Selection.
The portion of the current selection up to the current view becomes a clip, the selection is updated to exclude that section, so that the new From point is set to the current view position,
Post-Process command line can now be much longer.
Batch command line can specify multiple input file names.
There is a slight bug - the picture does not show until you navigate. EG: Mpg2Cut2 "File1.mpg" "File2.mpg" "File3.mpg"
Toolbar options.
Toolbar Buttons and Scrollbar can now be toggled separately. F12 = Scrollbar Only_ _ Alt-F12 = Buttons Only _ _ F11 = Both. Toggling and External players are now under the Window heading.
Settings can be saved for Zoom and Aspect Ratio override.
Allow for Packless Program Streams.
Tidy up of RGB mode and Fast 420 yuy2 chroma deinterlacer.
Fixed bug in LPCM decode where packet split across block.
Smarter alignment of leading audio packets.
Try to avoid false syncword bit patterns.
Experimental option to unmux audio in PES format.
Allows retention of timing info in PES hdr. Still experimental.
Correctly report Mpeg Audio Extensions.
Mpeg 2.5 and Low Sampling Frequency extensions will now report correctly.
Slow-1 now adjusts for difference between silent FPS and sound FPS.
Use when viewing silent film that was telecined too fast. (Keyboard shortcut = 's')
Allow for bug in ATI driver.
Some ATI drivers sometimes give sloping video on first display. To fix :-
MENU - VIEW - TECHNICAL - Overlay Notification - ATI sloping.
Manual allowance for Monitor Aspect ratio problems.
A new INI file line wth the keyword "N3" has been created. The first value on that line is a percentage amount to adjust for Monitor issues. EG. If the image on the monitor is 5% too wide, then set "N3=-5" to reduce the image width by 5%. Leave the other parameters on that line unchanged. Reserved for future use.
Experimental Audio read-ahead option.
Experimental feature preparatory to possible lip sync during preview, eventually.
Misc minor changes.
Warning for Panasonic DVD recorders :-
I still need to do a lot more work for compatibility. E.g. Long clips still seem to have problems for some reason.
Warning for Satellite users :-
The Time Stamp correction option is NOT compatible with Satellite.
» Author: sanko86 dtd. 05.03.2009
» Size 0.58 MB; Needed time to download 76.5 Sec. with ISDN
» Total Hits: 3982
» Rating: 4.33 at 15 Votes
Not Upload any Adult or Crack or Warez
Watching Pay Tv channels without a valid subscription is illegal , all files/information here are only for educational purposes only....
Last 50 Files
Search
Statistics
Home » Downloads » PROGRAM & SOFTWARE
Popular Files
